Two AC inputs with integrated transfer switch
The Quattro can be connected to two independent AC sources, for example shore-side power and a generator, or two
generators. The Quattro will automatically connect to the active source.
Solar energy: AC power available even during a grid failure
The Quattro can be used in off grid as well as grid connected PV and other alternative energy systems.
- Two AC Outputs
- Virtually unlimited power thanks to parallel operation
- Three phase capability
- Split phase options
- Four stage adaptive charger and dual bank battery charging
- System configuring has never been easier
- Remote Monitoring & Control
PowerControl - Dealing with limited generator or shore side power
With a Multi Control Panel a maximum generator or shore current can be set. The Quattro will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded.
PowerAssist - Boosting the capacity of shore or generator power
This feature takes the principle of PowerControl to a further dimension allowing the Quattro to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, it is possible to reduce the size of generator needed or conversely enable more to be achieved from the typically limited shore connection. When the load reduces, the spare power is used to recharge the battery.
|Cont. Output Power
|Input voltage range
||9.5-17 V 19-33 V 38-66 V
||45 - 65 Hz
|Charge voltage 'absorbtion'
||14.4 / 28.8 / 57.6 V
|Charge voltage 'float'
||13.8 / 27.6/ 55.2 V
||13.2 / 26.4/ 52.8 V
||2 x 100 A
||470 mm * 350 mm * 280 mm