tel. 01678 530445



m menu image  m home m cart

Have you seen ...

Off-grid Kit Sale

Victron Precision Battery Monitor 9.0-90VDC (2nd Bat input)

£130.22 ex VAT
£156.26 inc VAT

Add to Basket:



Details

  • Model: VBMV-702

Description

The Victron Precision Battery Monitor is a battery 'fuel gauge', time-to-go indicator and much more. The remaining battery capacity depends on the ampere-hours consumed, discharge current, temperature and the age of the battery. Complex software algorithms are needed to take all these variables into account.

Next to the basic display options, such as voltage, current and ampere-hours consumed, the BMV-700 series also displays state of charge, time to go, and power consumption in Watts.

The BMV-702 features Midpoint voltage monitoring which is often used in industry to monitor large and expensive battery banks, now made available at a low cost, to monitor any battery bank. Large or increasing deviation of the midpoint voltage, points to improper battery care or a failed battery or cell. Corrective action following a midpoint voltage alarm can prevent severe damage to an expensive battery.

  • Additional input to measure voltage (of a 2nd battery), temp or midpoint voltage
  • Can be monitored and programmed via smartphone using a Bluetooth Smart dongle
  • Battery voltage, current, power, ampere-hours consumed and state of charge
  • Remaining time at the current rate of discharge
  • Programmable visual and audible alarm
  • Programmable relay, to turn off non critical loads or to run a generator when needed
  • 500 Amp quick connect shunt and connection kit
  • Shunt selection capability up to 10.000 Amps
  • VE.Direct communication port
  • Stores a wide range of historical events, which can be used to evaluate usage patterns and battery health
  • Wide input voltage range: 9.5 - 95V
  • High current measurement resolution: 10 mA (0.01A)
  • Low current consumption: 2.9Ah per month (4mA) @ 12V and 2.2Ah per month (3mA) @ 24V

All electrical connections are to the quick connect PCB on the current shunt. The shunt connects to the monitor with a standard RJ12 telephone cable. Included: RJ12 cable (10 m) and battery cable with fuse (2 m); no other components needed.



Downloads








Copyright © 2017 RemotepowerUK. Powered by Zen Cart. Responsive Zen cart templates by Picaflor Azul.